Product successfully added to your shopping cart
The most commonly used form of glass fibre reinforcement.
Conforms to Lloyds and British Standard Specifications.
Benefits:
Soft to handle
Easy to lay
Good air release
Conforms well to complex shapes
Lloyds approved
Rolls come in 1 meter width:
450g (33kg).
600g - 55 meter roll,
900g - 36 meter roll.
available:
48
An easy to use, smooth textured polyester filler for deep repairs. The non-sag formula is ideal for use on vertical or horizontal repairs and its lightweight formula bonds to multiple substrates including galvanised steel, metal and GRP.
3.5ltr
available:
44
A magnesium silicate filler which can be mixed with resin to produce a casting resin or resin putty.
Benefits:
Inexpensive filler
Works well with all resins
Reduces shrinkage
Reduces heat generated by curing resin
Absorbs moisture
Available in a range of sizes.
available:
47
Non silicone soft wax used on mould surface etc. to obtain a good release. Usually used in conjunction with PVA Release Agent.
Available in a range of sizes
available:
49
This single-component contact adhesive boasts high tack and low viscosity, making it ideal for bonding materials such as wood, glass, carpet, leather, and card. Specifically formulated for non-mechanical applications, it is easy to apply, has a long shelf life once opened, and dries quickly.
available:
22
Catalyst Metox are peroxide initiators of copolymerization of unsaturated polyester resins. They are used mainly with cobalt accelerators to cure at ambient temperature. Suitable for manual and spray lamination. They can be used e.g. for the production of polymeric concrete. Compared to the Metox-50 hardener, they exhibit slightly longer gelling times. Owing to its reduced water content, Metox-50W is recommended for curing gelcoats,
Certain polyester lacquers and others.
Benefits:
Cures Gelcoats and Resins
Hardener for Gelcoats
Suitable for manual and spray lamination
available:
0
Chopped Strand Matting is the standard form of Fibreglass used in hand lay up and when used with polyester resin produces strong, stiff and tough laminates for Boats, Water tanks, Industrial and Domestic applications. Resin use is 2.25 times the weight of glass used, so for 1 sq. m of 450gm mat then 1kg of resin will be needed. Wet out is complete when the laminate is almost transparent.
available:
0
A popular and widely used mould release agent. Can withstand exothermic temperatures up to 121 degrees Celsius.
Always wear appropriate eye and skin protection when working with the mould release agent to prevent harm to yourself.
available:
50
A high-quality quality maximum release mould agent. Once applied, it creates a durable wax surface. Offers high temperature moulding.
available:
50
Loctite® Frekote® PMC is a special blend of solvents designed to dissolve and remove wax from polyester molds without dulling the surface.
Availible in 5ltr containers.
available:
50
Showing 10 of 35